Tag: Physics

Exploring Airport Security: How Baggage Scanners Work | September 02 2025, 20:29

The day after tomorrow, I am flying to Amsterdam (and then to Turkey), and I remembered that I had an unanswered question to myself about how baggage scanners work at the airport. Of course, I knew that it was essentially computer tomography, X-rays and all that, but I wanted more details. And below is the response as to why they ask you to take out water, and why sometimes they do not.

It turns out that modern scanners can not only see the shape of objects but also determine what material they are made of. How does a regular scanner work? Dense materials (such as metal) absorb a lot of radiation and appear bright or opaque in images. Less dense materials absorb little radiation and appear dark. Hence laptops, for example, had to be taken out — not because the scanner couldn’t recognize them, but because their dense components (battery, boards) could be used to hide other prohibited items behind them. So, it has long been not just scanners, but computer tomography — in essence, the bag or suitcase is scanned from all sides, then a 3D image is created. It seems like everyone knows this.

But I mentioned that they understand the materials items are made from. How?

It turns out that the scanner uses dual-energy X-ray technology. It scans the object with two beams of rays of different energy levels (high and low). Since materials absorb radiation differently depending on the energy of the ray and their atomic composition, the system analyzes this difference. Based on the absorption ratio of the two beams, the effective atomic number Z — a key characteristic, a kind of “elemental fingerprint” of the substance, is calculated.

The problem is that this “fingerprint” of water (~7.4) and many explosives are almost identical. This is precisely why water was banned. Relying only on this parameter would mean receiving a huge number of false alarms.

Here is where computer tomography (CT) comes into play. The scanner creates an accurate three-dimensional (3D) model of the contents of the bag. From the 3D model, the system obtains the exact volume (V) of each object. Based on data on the absorption of X-rays, its mass (m) is calculated. Then it’s simple: ρ=m/V.

That is, the system does not make a decision based on one parameter. It plots each detected substance on a two-dimensional graph with axes “Z — density.” On this graph, water and explosives, having almost the same atomic number, occupy completely different positions due to different densities.

And that’s precisely why water can sometimes be carried through. Smart machines simply do not mark it as something significant, but still identify it as water. Then procedures follow. If the airport has updated the machines, but not the procedures, they will ask to dispose of the water. But also, not all machines are updated everywhere, and at the same airport, it depends on which line is open at the moment.

The cost of such a scanner is $300-400 thousand.

The scanners for people work differently. They use millimeter waves. They pass through clothing and reflect back from the skin. Water absorbs them significantly, so they penetrate only a couple of millimeters. The system registers the reflected signal and constructs a three-dimensional map of the body surface and objects under the clothing. But it does not show this — instead, it displays a simplified contour of a person and shows on it what ML found unusual. Therefore, by the way, many try to carry various items inside themselves, knowing that such a scanner absolutely cannot see it.

The Ingenious Spy Device Gifted in Friendship: Unveiling The Thing | September 01 2025, 01:03

Today in the museum I saw The Thing in person – simply a brilliant espionage device. In 1945, a group of Soviet schoolchildren presented a large wooden Great Seal of the United States to the U.S. Ambassador in Moscow, Averell Harriman, as a “gesture of friendship”. The seal was beautifully hand-carved and hung in the ambassador’s office for a whole 7 years. And it leaked secrets!

No batteries involved! It was all very clever, especially for 1945.

Essentially, it was a passive radio relay or “parasitic resonator”. Inside the wooden seal was a small metal cylinder with a membrane and an antenna-rod.

Soviet operators directed a specific frequency radio wave (about 330 MHz) into the ambassador’s office.

Inside the device was a cavity resonator, tuned to the same frequency. It “responded” to the radio signal and began to retransmit it back.

On one side of the cylinder was a thin flexible membrane. It vibrated from the sound in the room (voices, footsteps).

The vibrations of the membrane altered the capacity and resonance parameters of the device, slightly shifting the reflected radio signal by frequency and phase. This was the modulation of speech onto the external signal.

Outside the building (like in a KGB car nearby), the retransmitted signal was received and the sound modulation was extracted – effectively capturing the overheard conversation.

Why was this almost impossible to detect? The device had no battery and emitted nothing by itself. It “came to life” only when irradiated with an external radio signal. In standard radio monitoring checks, it remained “dead”. Essentially, it was akin to an ancestor of the RFID tag – a passive device that operates only on external request.

But most interestingly, the inventor was Leon Theremin, the same person behind the musical instrument “thereminvox” (played with hands in the air).

His biography reads like a novel. In the early 1920s, Theremin went to the U.S., patented his thereminvox instrument, and collaborated with RCA; his New York studio was visited by Charlie Chaplin, Albert Einstein, Gershwin, and other notable personalities. It is written that he visited the USSR – Already in 1926, he demonstrated television at the Kremlin.

At that time, televisions with screens the size of a matchbox were being created, but his television had a huge screen (1.5 x 1.5 m) and a resolution of 100 lines. In 1927, the scientist demonstrated his installation to Soviet military leaders K.E. Voroshilov, I.V. Tukhachevsky, and S.M. Budyonny:

state minds watched in horror as Stalin walked through the Kremlin courtyard on the screen.

This sight so frightened them that the invention was immediately classified and quietly buried in the archives, and television was soon invented by the Americans.

Eventually, in 1938, he secretly returned to the USSR, but was soon arrested as a “non-returnee” and sent to the camps, but his talent was still used in the so-called “sharashka” – on projects together with Sergei Korolev, including the development of radio-controlled apparatuses and listening systems, including the aforementioned “Great Seal bug”.

Exploring the Boundless Spectrum: The World of Animal Hearing | August 29 2025, 17:56

From my notes as I read Ed Yong’s Immense World—

“..It is known that the range of audible frequencies for animals is different from that of humans, but I didn’t realize just how different. Imagine the highest pitch in the world—it would be just under 20 kHz, as it’s considered the upper limit of the audible range. Both the upper and lower limits tend to decrease with age. Most adults can’t hear sounds over 16 kHz. Anything above 20 kHz we call ultrasound.

.

So, it turns out that our closest relatives, chimpanzees, can hear up to 30 kHz, dogs up to 45 kHz, cats up to 85 kHz, mice up to 100 kHz, and moths even up to 300 kHz. Imagine, there are so many high-frequency sounds around us, and how rich their sound world is compared to our limited one. It would be interesting to wear headphones that compress the range from 20-40000 Hz to 20-15000 Hz. Many animals, such as mice, actively use ultrasound for internal communication, beyond the hearing range of their predators.

.

And when the topic of ultrasound comes up, it’s impossible not to mention bats with their echolocation. Turns out, it’s a wildly interesting topic.”

.

Probably everyone knows that bats successfully hunt in caves, where no light penetrates at all, and they don’t crash into stalactites and stalagmites. There’s an English saying, blind as a bat, but actually, they can see. Some species see better, others worse. But let’s talk about echolocation.

.

In general, it’s just radar. The bat screams, the sound bounces off a tree, comes back into its ears, and it gets information about how far away the tree is and whether to slow down or not. But the devil, as they say, is in the details. “Engineering” ones.

.

Firstly, high-frequency sound attenuates quickly, so you need to shout very loudly for something to bounce back from a few meters away. Beyond that, bats simply don’t “see.” So, they do indeed shout very loudly, and it’s a directed scream. Specifically, they measured 138 decibels, the sound level of a jet engine if you stand next to it. But in the ultrasonic range.

.

Secondly, when they scream so loudly, they need to plug their own ears so as not to kill their sensitive apparatus. It turned out that they have special muscles that block the inner ear during the scream.

.

Thirdly, both they and their prey are on the move, very fast and erratic. Meanwhile, the speed of sound is about 343 meters per second. The bat’s brain must calculate the difference between the signal and the echo, taking into account both its own movement through space and the movement of the prey. It turned out that the bat’s vocal muscles can contract up to 200 times a second. Moreover, the frequency depends on the phase of the hunt. 200 times—that’s the final phase, when the moth is right in front of the nose, and tiny movements need to be tracked.

.

Fourthly, the bat’s brain also has to cope with creating interference between what was shouted out two moments ago and what was shouted out a moment ago. Considering that the sound can echo off the far wall and the near branch. Plus there are waves from the cries of other bats, and they’re usually very numerous in caves. To manage this, they seem to throw a bit different modulation, plus this musculature allows them to “fire” very short pulses—a few milliseconds—and to renew pulses at their own frequency through very short intervals. Imagine what kind of computer in their brains performs the inverse Fourier transform.”

.

So, all this works pretty well in small groups. But for example, the Brazilian free-tailed bats live in groups of millions. Really, together 20 million mouths shout something and wait for their echo from the walls and each other. You can’t just pick modulation and frequencies that easily, but somehow they manage. Not perfectly, and if they gather in a really big bunch in the cave, then they perform their commute to the hunt and back to the cave “by memory” – probably due to issues with echolocation. When a “door” was placed at the entrance to the cave, a bunch of bats crashed into it.

.

Fifth, consider how they determine distance. It’s necessary to calculate the difference between the signal sent and the signal received (amid a bunch of noise from other bats), and for hunting, it needs to be calculated very precisely. And sound of course isn’t light, but 343 meters per second is also a lot. So studies have shown that bats can recognize differences as little as 1-2 millionths of a second, which allows them to determine distance to fractions of a millimeter. In other words, our eyes are significantly less accurate than their ears.

.

Plus, a moth is actually a fairly complex 3D creation that reflects sound differently with its different parts. Otherwise, bats would eat everything that moves. They recognize. In complete darkness. A mouse’s scream contains a whole palette of frequencies, which reflect differently off parts of a moth, and the mouse’s brain somehow manages to translate this into a coherent picture. Moreover, for each of the constituent frequencies, the delay will be its own.

.

Then, all this information is layered over time. Roughly speaking, a snapshot from one point is combined with a snapshot from a point a half meter to the right, then from a point half a meter forward, and so on many, many times, which enhances “sharpness” and detail. Overall, it’s the same with us – we only see the spot in front of us clearly while the rest is constructed by the brain. But the brain of a bat weighs 1-2 grams against our half kilogram.

.

Think about it, you’re flying with such a built-in radar, and in front of you are two branches at the same distance, which produce essentially the same echo for their ears. And to distinguish them and understand that it’s not one object but two, you really need an advanced brain.

.

So, they send pulses lasting 1-20 ms, plus longer pauses between pulses. The pulses are complex in terms of frequencies, so such bats are called frequency modulation (FM) bats. But there are about 160 species that have a much longer cry—many tens of milliseconds but with short pauses, and instead of a complex gamma of frequencies, these use a pure “note.” These bats are called CF—constant frequency. So here’s the thing with these bats—there’s a problem with the Doppler effect, which is an increase in frequency as the distance decreases. Since their brain is tuned to a strict frequency, like 87 kHz for example, they might lose their prey if the echo that reaches their ears is shifted in frequency. And what they do—they shout at a sound speed lower, so that after the Doppler effect it arrives at the correct frequency for the brain.”

.

Incidentally, their radar has two modes—forward and downward, the echoes from which are processed separately. The downward radar provides information about position in space, and the forward radar—about the position in space of the prey.

.

When I researched the subject, I found that yes, after 20 kHz humans hear nothing, with one exception—frequencies of 2.4 GHz and 10 GHz, which actually belong to the microwave range. Yes, humans can “hear” these frequencies, but not with the ear, but “hear.” This phenomenon is called the microwave auditory effect or the Frey effect. Initially, this effect was registered by people working near radars during World War II, and the sounds they perceived were not heard by others. It turned out that when pulsed or modulated microwave radiation was applied to areas around the cochlea, it was absorbed by the tissues of the inner ear, accompanied by their thermal expansion. In the course of this process, shockwaves are produced, perceived by humans as sound, which no one else hears. It was also discovered that with the appropriate choice of the modulating signal, it is possible to transmit information to a person in the form of individual words, phrases, and other sounds. Depending on the radiation parameters, the sound created in the head can be irritating, cause nausea, and even disable. The volume of the perceived sound can be changed, but acoustic trauma is not possible, as the eardrum does not participate in the process at all. Generally speaking, the method of specifically transmitting sonic messages that are absolutely inaudible to others opens up a whole bouquet of possibilities. I wonder if research is still being conducted on this topic. Google shows that they used to be pretty intense.”

I once published this along with a video, and Facebook reckons that if you publish a video, the text should be one, at most two lines. And in the end, almost no one saw this text. Everyone just watched the video of a bat flying around my apartment 🙂

Inside Apple AirPods: Design, Battery, and Antenna Secrets Revealed | August 23 2025, 01:52

Very interesting video about how Apple Airpods headphones work (in the comments). You can read about it, or you can just like this post and go check out the original video in the comments. It has pictures!

Battery. 6 hours of operation, but the capacity is only 2% of the iPhone battery capacity. “Dead zones” in the battery, which lead to reduced operating time, can occur due to sudden temperature changes or even just dropping the headphones on the floor. There is a very dense “layered cake” made from a couple dozen layers of anode-cathode. Batteries of fake AirPods or cheap analogs are much worse. Physics: Poor packaging means less active material and fewer lithium ions moving with each cycle => reduced energy density and increased internal resistance => more energy is lost as heat => battery wears out faster.

Antenna. It is located in the stem because the human head significantly dampens the signal. But there is little space in the stem. Metal strip antenna, size 2 mm by 10 microns(!). That’s thinner than human hair. At such size, it cannot maintain shape on its own. In other consumer electronics, antennas can be etched on the printed circuit board, but this limits them to two dimensions. For the AirPod stem, there isn’t enough space. Therefore, Apple uses a clever solution. They embedded the antenna in the surface of a molded plastic cylindrical part. There, clever conductive plastic is used, with added metal. A laser engraves the exact shape of the antenna in the form of small channels with a rough surface. Then, this groove is subjected to electroplating, first with copper, then covered with gold to protect against corrosion. As a result, a durable conductive track is formed, which matches the 3D geometry of the molded part, which would be impossible to create using traditional machining methods. The plastic not only structurally supports the antenna. Other components are attached to it, such as the cable wrapping around the stem to connect the antenna to the Bluetooth chip, the pressure sensor in the stem.

Microphone. In AirPods, not electret microphones, but MEMS: a microelectronic” version of the condenser type. Well, actually, this is not only Apple – any modern TWS headphones, unless they are the cheapest ones. That is to say, modern microphones are made using the same technology as types – photolithography, layer by layer, only in this case it’s a mechanical device, with calculated cavities and flexible layers. Separately interesting is how they make the cavities – they make holes through which etching solution penetrates inside and dissolves the sacrificial layers of silicon dioxide.

Because of such microscopic size, there are several microphones. But why more than one microphone is needed? At the bottom of the AirPods, you will see a small mesh that allows air to enter the second microphone. When you talk, your voice reaches both microphones, but not at the same time. With a difference of only a few millimeters, the chip can detect a delay of six microseconds between when your voice reaches each microphone. This is enough to determine where the sound is coming from and focus on it. Since it precisely knows the distance the microphones are from one another, the chip can compare each signal and amplify your voice during calls.

The third microphone is for noise cancellation. It is located right in front of the speaker, inside your ear.

The microphones consume about 130 mA, which would quickly drain the battery if they were always active. That’s why they are only turned on when you make a call or use noise cancellation. But AirPods are always waiting for a Siri request. How is this possible without constantly active microphones? Here’s a clever solution. Inside the part that is in your ear, there is a small sensor—an accelerometer. It’s the same type of sensor used in phones to determine orientation. But here it serves a different purpose. Instead of measuring orientation, it senses vibration. When you talk, your voice moves through your jawbone. And this vibration is detected by the accelerometer. This low-power consumption signal is enough to wake up the system and activate the microphones when it senses you want to activate Siri. Imagine that, eh?

The sound in AirPods is tuned not “by ear,” but based on a scientific model of the “ideal sound” (Harman curve), which describes the combination of frequencies most people find most pleasing. For this, there is a complicated system of calculated vents and meshes — to control the air flow, which prevents the occurrence of unpleasant “humming” or sharp sounds inside the ear canal. The larger the cells — more air passes through, smaller — less. Such is the mesh, visible as black things on the white earphone—I thought it was for beauty. No, this is exactly that mesh. But at the same time, some kind of moisture protection must be made, and here the mesh is porous. It is claimed that there is some sort of nano-coating that repels water.

Bluetooth. Why it is so immune to interference. Turns out, it uses frequency-hopping spread spectrum technology (Frequency Hopping). Bluetooth devices quickly switch between different channels many times a second and adapt accordingly.

Decoding “Carboy”: A Journey Through Language and Autobiography | August 20 2025, 04:02

Rereading Feynman’s autobiography, this time in English, and my eyes stuck on the word carboy. It turns out that it’s the same as lady jeanne, and the same as demijohn – essentially lady jeanne in French (dame joanne). In short, it’s just a bottle.

Aluminum: From Precious Metal to Everyday Marvel | August 03 2025, 01:09

The USA imports aluminum mainly from Canada because aluminum leaves Canada and arrives in the USA. And from Europe, it would be alumin𝒊um!

Also, sapphires and rubies are essentially rusty aluminum, where in the process the new material becomes much harder than the original. In interaction with oxygen, different varieties of the mineral corundum are formed, which chemically is crystalline aluminum oxide (formula Al₂O₃). And bulletproof glass is essentially transparent rusty aluminum, aluminum oxide, but with aluminum nitride.

Also, aluminum was the most valuable metal on Earth until the 20th century. When Napoleon III entertained guests, they ate with golden spoons, while he used an aluminum one. And the “cap” of our Washington Monument is made of aluminum for that very reason.

Time Bending Flights: Greeting Seattle a Quintillionth of a Second Younger | July 19 2025, 05:19

It’s funny to stare at a sentence in a book that says when you fly to the other end of the USA, you become younger than everyone else by a quintillionth of a second — at the moment when you’re sitting on the plane flying to the other end of the USA.

Hello, Seattle!

Why Don’t We Have Self-Sustaining Solar-Powered Drones Yet? | July 16 2025, 01:33

I wonder why we still don’t see autonomous drones that could lead an “eternal” life: landing on roofs, deploying solar panels, charging from the sun, and taking off once a day for whatever their mission might be? When you consider the energy aspects, it seems like a feasible scheme. For instance, a heavy drone weighing about 8 kg could carry foldable solar panels with an area of 1.5 m² and a battery with a capacity of 2 kWh. In one sunny day, such panels could collect about 1.2 kWh of energy — enough for it to fly for 20 minutes at a speed of 40–50 km/h, take photos, and transmit them via the mobile network. And there would still be a reserve of energy for several cloudy days.

Even a light drone weighing 2 kg with small panels (0.5 m²) could rise into the air for 10–15 minutes every day if it managed to find good weather and a sunny roof. The power required for hovering for such devices is about 150–200 W, and solar panels with 20% efficiency at mid-latitudes can produce up to 350–400 Wh per day. The balance comfortably adds up, especially if not chasing speed and if there’s no rush on the roof.

Such a “solar nomad” could live for weeks and months, flying from roof to roof and charging in anticipation of missions. At first glance, the technology of batteries and panels already allows this to be done. Or am I missing something?

Exploring the Slug: An Unusual Imperial Unit of Mass | July 15 2025, 20:52

Have you ever heard of a unit of mass measurement called a slug? In the US, it does exist, even though it’s less common nowadays. American physics and engineering textbooks for students, especially where they want to clearly differentiate between mass (slug) and weight (lbf), tend to use the imperial system with its feet and the like. It simplifies F = ma in the imperial system without introducing extra coefficients.

1 slug is the mass that accelerates by 1 ft/s² under the force of 1 pound-force (lbf). Thus, a slug accelerating at 32.174 ft/s² “weighs” 32.174 pounds-force (lbf). 32.174 ft/s² is our 9.8 m/s², just in feet.

A “slug” is, on one hand, a slug (a slow-moving mollusk without a shell), and on the other hand, a heavy piece of metal or a bullet (like a shotgun slug – a large-caliber cartridge). In the context of the unit of mass, it’s not about mollusks, but rather about a “heavy lump.” But it’s still funny when they write “mass equals 5 slugs.”

12 slugs equal 1 blob (image of blob attached). Blob is a version of slug, but based on inches instead of feet. It has fun slang names – slinch, slugette, snail.

I also read about the British Thermal Unit — the amount of heat needed to heat 1 pound of water by 1°F. Converting BTUs to calories or joules results in a quite awkward number.

Exploring the Bubble Method of River Level Measurement at the Potomac | July 06 2025, 19:38

How would you measure the water level in a river? A float? A pressure sensor? Something else? Yesterday, I discovered how it’s done here on the Potomac, and it turned out to be not at all what I had imagined. The USGS engineers are great—they educate passersby by posting a diagram of the operation.

A tube is lowered into the river through which air is supplied in bubbles (through a bubble orifice). A special pressure sensor (Pressure Transducer) measures the air pressure in the tube that is necessary to release the bubbles from it. The higher the water level in the river, the more pressure is required to push the air into the water—because the air pressure in the tube is directly related to the depth of the water (according to Pascal’s law). The bubble method works well even if there is floating debris or ice in the river, which may interfere with other sensors (such as ultrasonic ones). Since the sensor does not contact the water, it always remains dry and clean. Additionally, to prevent data distortion, the system includes an air dryer (Air Dryer), which removes moisture from the air and prevents condensation.

The accuracy of such systems is 1-2 cm in water level for rivers with shallow depths.

Interestingly, the readings are transmitted not through the mobile network, but via satellite.